...
- Uncheck all UAV objects with status that is not OK. Those objects are incompatible with current software or may have been modified.
- If you intend to import only temperature calibration check only objects AccelGyroSettings and RevoSettings. One can also edit UAV XML file manually and keep only relevant objects for future import.
Note:
| Warning | ||||
|---|---|---|---|---|
| When you import UAVs from file (even though you clicked close button)
| |||
When importing UAV objects from file, settings are sent to flight-controller, but not saved until you press "Save to Board Flash". As a consequence, any further changes in GCS that are saved onto flight-controller will also save imported settings. It is advised to reboot flight-controller if you do not want imported settings and you want to proceed with other changes in configurationimported settings stay in the flight-controller memory until flight-controller is rebooted. However if you proceed with other changes without rebooting flight-controller but earlier importing UAVs file, imported settings will be saved to flash. |