After calibration it is convenient to export your settings into a file. The other common usage is exporting temperature calibration alone, such that it does not have to be repeated upon next calibration of other sensors or after upgrade & erase.
Export UAV objects into XML file
Import UAV objects from XML file
When importing from UAV files:
- Uncheck all UAV objects with status that is not OK. Those objects are incompatible with current software or may have been modified.
- If you intend to import only temperature calibration check only objects AccelGyroSettings and RevoSettings. One can also edit UAV XML file manually and keep only relevant objects for future import.
Note:
Imported UAVs are sent
When importing UAV objects from file, settings are sent to flight-controller, but not saved until you press "Save to Board Flash". As a consequence, imported settings stay in the flight-controller memory until flight-controller is rebooted. However if you proceed with other changes without rebooting flight-controller but earlier importing UAVs file, imported settings will be saved to flash.