Partially worksAfter the Transmitter Wizard is started, some sticks are not detected. One primary stick not workingIf PWM input: Swap wires and check if the same issue still. In some cases one channel is wrongly detected as a stick due to a channel with jitter. Resolve jitter issue or do the channel <> stick function mapping manually, using the Receiver Activity information. Flight mode - Accessory issueBe sure your flight mode switch or accessory knob/switch is assigned to one receiver output. Configure your transmitter according to the manual. Check the monitor output screen in your transmitter. Flicker the flight mode switch quickly when asked. |