Introduction
Section | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
You need to assign a switch to a output in your receiver, like this Taranis example, SF switch mapped to Output6 (ASWA) :
...
Configure RcInput
After the changes above in your Rc transmitter you need to redo the Rc Transmitter Wizard and detect the new channel as a new Accessory[0 - 3].
...
Column | ||
---|---|---|
| ||
|
...
Using FlightMode switch
The FlightMode switch can be used to enable ASWA for some flightmodes.
You should keep at least the flightmode#1 for arming, the "ASWA" flightmodes are above the Accessory neutral value.
...
The flightmode Accessory clone neutral need to be adjusted, in this example the flightmode#1 allow arming (ASWA Off) and above Accessory neutral the flightmode#2 and #3 get AlwaysStabilizedWhenArmed enabled.
...