At this state you should get a red cross over GPS alarm in SystemHealth
- Power the board with external source, usually +5v from a step down or Esc
If GPS is talking with CC3D you should get a red alarm:
After a successful GPS lock, a orange/green alarm:
GPS panel display a minimal set of informations: - Lat/Lon + altitude
- Speed
- Heading (from path direction)
- Number of sats used
- Fix type
- No GPS on skyview, no date/time: This is normal, CC3D works only with a minimal set of messages. Like explained in Configure a GPS for CC3D page.
|