Typical values are about 10-20 percent and can be set for every axis / stick input
- Input % represents the stick input value coming from your RcRadio.
- Output % represents the stick output value used onboard.
In this page
Expo settings example
In this example:
- Yaw axis is set to 0, response is linear: 50% on RC stick give 50% output.
- Roll axis is set to 50%, response is not linear anymore: 50% input on RC stick give around 38% output.
- Roll axis is set to 80%, response: 50% input on RC stick give around 30% output.
