...

36x36mm with 30,5x30,5mm hole spacing

Connectivity

Powering the board

Board can be powered with 4,8-15V DC power supply, usually from one of ESCs integrated BECs or an external 5V BEC. The voltage used to power the board will also power any peripheral devices like GPS, Bluetooth modem,... connected to it.

All input/output (Rx, Tx, PWM, etc.) signal levels are 3,3V (5V tolerant)

All Vcc pins are can be used to power the controller and devices connected to it.

PWM Outputs 1-6

These are PWM outputs used to connect servo motors and ESCs. Outputs 5 and 6 can also be configured as analog inputs

...