...
Section | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
...
Section | |||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Building a SWD cable
|
...
...
Software setup
...
Download the required software from the ST website, need registration: ST website download page
...
It will automatically install the drivers and provide the option to upgrade the firmware.
...
Update STLink dongle firmware
If you have problems you may try updating the dongle firmware, but be aware that this can brick a clone STLink dongle.
Connect the STLink dongle and start the ST-Link Utility software.
...
- The STLink dongle firmware us is up to date now.
- Disconnect the STLink dongle.
...
...
Bootloader binaries
Here is the bootloader binaries for various boards, to be used with STLink utility:
...
For bu_* files to be flashed using GCS, see the Downloads page instead.
Section | |||||
---|---|---|---|---|---|
|
...
|
- Connect the device using the icon
...
- At this point memory content should be populated and device characteristics displayed, here is a CC3D example:
...
- Click Start to flash device
...
- Device is now flashed with the new bootloader file.
...
- Disconnect the device using the Disconnect button:
...
...
Update the firmware
Section | |||||
---|---|---|---|---|---|
|
...
|
...
|
...
...
|
...
...