Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section


Column
width50%

HoTT configuration

UAVOBrowser

All configuration settings can be found using the UAVOBrowser in System tab.

  • Sensors: Enable or Disable the sensor to be emulated
  • Limit: Set the limit values used as alarm
  • Warning: Enable or Disable alarm

Warning alarmsImage Added

Save settings using the save icon



Column
width50%

Modules emulatedImage Added

Limit valuesImage Added



...

Section


Column
width95%

Sensors

According to the sensor emulated here is the Limit/Warning to be configured, if needed:

Modules emulatedImage Removed

Limit valuesImage Removed

Warning alarmsImage Removed
Limit/WarningVarioGPSEAMGAMESC
AltitudeBeepXX
X
Altitude announces: 20m, 40m, 60m, 80m...
MinSpeed
X


Need a GPS
MaxSpeed
X


Need a GPS
NegDifference1XX
X
Sudden descent
PosDifference1XX
X
Sudden rise
NegDifference2XX
X
Fast descent
PosDifference2XX
X
Fast rise
MinHeightXX
X
Low altitude limit
MaxHeightXX
X
High altitude limit
MaxDistance
X


Need a GPS
MinPowerVoltage

XXXVoltage data need at least a basic voltage divider
MaxPowerVoltage

XXX
MinSensor1Voltage

XX

MaxSensor1Voltage

XX

MinSensor2Voltage

XX

MaxSensor2Voltage

XX

MinCellVoltage

XX
Individual cell voltage is calculated, not measured.
MaxCurrent

XXXCurrent need a Current sensor
MaxUsedCapacity

XXXUsedCapacity need a Current sensor
MinSensor1Temp


XXSensor1 = Gyro temperature
MaxSensor1Temp


XX
MinSensor2Temp


X
Sensor2 = Baro temperature
MaxSensor2Temp


X

MaxServoTemp





MinRPM

XXXNo RPM sensor connected to the board
MaxRPM

XXXNo RPM sensor connected to the board
MinFuel


X
MaxServoDifference
Column
width50%

No fuel jauge sensor connected to the board
MaxServoDifference







...

Filter by label (Content by label)
showLabelsfalse
max5
spacescom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@4546114
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ( "kb-how-to-article" , "hott" ) and type = "page" and space = "LPDOC"
labelskb-how-to-article Hott

...