Hello Support Team, I have currently installed the Spektrum SPM4649T receiver. I have problems with the channel assignment. It will show me on my dx8 12 channels. I use Mode 2 for my heli. 4 channels per stick are displayed. Thank you for your support
Environment
I habe a Revo FC Form Hobbyking and the T-Rex 470 Super Combo
Attachments
12
Activity
Show:
Volker Lange-Kleemann
May 17, 2018 at 7:54 PM
Hello Lalanne, i have carried out the test, unfortunately, the DSM Flexi Port now always deactivates, See my screenshots. It works again with the test FW. Best regards Volker
Lalanne Laurent
May 17, 2018 at 6:14 PM
(edited)
Can you do another test while flashing first the original bootloader and next, using the attached firmware with similar delay ?
Volker Lange-Kleemann
May 17, 2018 at 2:38 PM
(edited)
Hello Lalanne, thanks for the quick help, it works (. I'll test it and then report it. The binding process for this receiver is done via a jumper. Best regards Volker
Lalanne Laurent
May 16, 2018 at 10:25 PM
(edited)
Try flashing the attached bootloader:
Please note you will have issues using the board for binding process, using this bootloader.
Volker Lange-Kleemann
May 16, 2018 at 6:30 PM
Hello, the Spektrum receiver unfortunately works under NEXT only sporadically. After the Revolution FC has been restarted by software :the Spektrum receiver is recognized correctly and works. Can this error be corrected? Best regards Volker
Highest
Hello Support Team, I have currently installed the Spektrum SPM4649T receiver. I have problems with the channel assignment. It will show me on my dx8 12 channels. I use Mode 2 for my heli. 4 channels per stick are displayed.
Thank you for your support