...
Pulse Width Modulation (PWM), is a simple technique to encode a single value that can be sent to the Esc, it can be used as well to retrieve values from a Rc Receiver or drive a servo.
A A digital output is used to create a square wave with on/off or logical values sending a pulse length proportional to the value we want to encode.
...
Outputs are defined in Configuration > Output tab
Can be normal PWM + rate desired, PWMSync or OneShot125.
Output channels are organized as Banks, this means if you configure the output mode for one bank, all outputs that use this bank are configured the same.
Look at colors that matches Bank <> Output channel.
...