Page Comparison

Start with a default settings configuration:

For a Revo or Sparky board with current sensor connected to the controller board, those this options can be useful:

• Use FC main voltage
• Use FC amperage

• Use FC RSSI (receiver quality or OPLink Rssi if Oplink used fr for control)

To apply the changes, click the WRITE button before disconnect.

Configuration can be loaded or saved, here is the config file used in this example:

• LP16.09_Revo-3S.osd

For more information about MWOSD configuration and usage please take a look at:

• User guide
• FAQ